Panmintina Parad Saray Managkotkot .
Jun 03, 2025
1. When the excavator stops running, carefully check whether the anchor bolts and bearing housing screws of all parts are loose, the meshing and lubrication conditions of all gears, as well as whether there is any abnormal wear or damage to the bearings, power unit, control system, brake, reducer, track plate, foundation components, cables, steel wire ropes, bucket teeth and other parts.
{0} Legan na operasyon, imanoen so kipapasen na pambabatik na kada motor, mekanikal, tan no kasin wala so antokaman ya abormal iran bengatla ed sistema na panagpreno, mangontrol na bentilador, tan arum niran problema, nepeg a naromog ed saray tombok tan paknaan ed panaon tan paknaan na saray tombok ed panaon tan paknaan.
3. For newly installed excavators, all parts must be filled with oil before the trial operation, and the lubrication condition should be checked every shift within the first week of operation. For excavators that have been out of operation for a long time, all the old dry oil must be squeezed out before use. Good lubrication can reduce mechanical wear and malfunctions during operation. Lubrication work must be ginawan malet unong ed limitasyon na panaon, say karakel na langis tan klase na larak a panagpalsipika a nipabitar ed samay manual na panagkotkot{4}.







